
LAUNCH X431 CRP919X Scan Tool
Where we recommend it
The LAUNCH CRP919X and Its Kits·#1
The CRP919X on its own, over Bluetooth or a USB cable, with two years of free software updates.
The CRP919X is the diagnostic core of the CRP919X range, and it stands on one point that the rest of the kits build around: it talks to every module on the car and it can send commands back. That is the bidirectional part. You are not reading a code and guessing what is wrong; you are commanding a solenoid to cycle, a window motor to run, a fuel pump to prime, and watching the response come back on screen. ECU coding is in the software, which matters when you are swapping a module or reprogramming after a repair. TPMS and battery service are built in, and it speaks CAN FD and DoIP, so it handles the newer wiring harnesses you run into on a car that has been updated over the years. Two years of free software updates means the module database keeps growing without you paying again. Where it is less well suited is if the job is hands-on hardware work that needs a dedicated tool at the bench. The built-in TPMS service covers the software side; if you need to program a new sensor or match a frequency, the i-TPMS kit adds that hardware. A smoke machine for tracing a vacuum leak through a tucked-away line, or a dedicated battery capacity tester that goes past what the scan tool's battery service reports, are likewise separate items. For the owner who is mostly working through electrical gremlins, module-to-module communication, coding tasks, and wants one tool that covers the full diagnostic range without a shelf of single-purpose gadgets, the CRP919X on its own is the right starting point.
Estimated retail value
$519.00
As of Oct 30, 2026
About it
LAUNCH's CRP919X is an all-system bidirectional OBD2 scan tool: it reads and clears codes in every module the car carries, sends test commands to them and does ECU coding, with TPMS and battery service built in. It supports CAN FD and DoIP, connects by Bluetooth or USB cable, and includes two years of free software updates. This is the scan tool on its own.
Also in The LAUNCH CRP919X and Its Kits
2
LAUNCH X431 CRP919X Scan Tool + i-TPMS
Adds LAUNCH's i-TPMS handheld, which activates and programs tire pressure sensors, to the full CRP919X.
3
LAUNCH X431 CRP919X Scan Tool + CRP123X
Adds the CRP123X, LAUNCH's smaller reader for engine, transmission, ABS and airbag codes, as a second tool for the glovebox.
4
LAUNCH X431 CRP919X Scan Tool + VSP600, BST360 and i-TPMS
The CRP919X with three more tools in the box: the VSP600 inspection camera, the BST360 battery tester and the i-TPMS tire sensor tool.
Where these picks come from: LAUNCH US
