
LAUNCH X431 CRP919X Scan Tool + VSP600, BST360 and i-TPMS
Where we recommend it
The LAUNCH CRP919X and Its Kits·#4
The CRP919X with three more tools in the box: the VSP600 inspection camera, the BST360 battery tester and the i-TPMS tire sensor tool.
This is the full kit. The CRP919X itself is an all-system bidirectional OBD2 scanner: it reads and clears codes across every module the car carries, sends test commands back to those modules, and handles ECU coding when you've swapped a component and need to reidentify its adaptive data. It speaks CAN FD and DoIP, so it reaches into newer vehicles as well, and it connects over Bluetooth or a USB cable. Two years of software updates are included. The three add-ons round out a bench: the VSP600 gets a camera into the spaces a flashlight can't, the BST360 checks battery voltage when the electrical gremlins start, and the i-TPMS handles tire sensor work. For a classic-car owner doing their own work, the scanner's value is in the bidirectional testing and ECU coding. You've replaced a cluster, swapped an ECU, added an aftermarket component, and you need to verify the module responds and the car's adaptive data is reset. That's where this earns its keep. The OBD2 interface means it works on cars that carry that standard; if your car predates OBD2 or runs a proprietary harness, the tool won't reach it. The three add-ons are practical for a home shop: the camera for looking behind a firewall or under a dash, the battery tester for isolating a no-start that isn't the starter, the TPMS tool for sensor replacement. If you already own those three, the scanner alone saves you the overlap. If you're building the bench from scratch and want one box that covers diagnostics, inspection, and the small electrical jobs, this is the one that does all of it in a single purchase.
Estimated retail value
$819.00
As of Oct 30, 2026
About it
LAUNCH's CRP919X is an all-system bidirectional OBD2 scan tool: it reads and clears codes in every module the car carries, sends test commands to them and does ECU coding, with TPMS and battery service built in. It supports CAN FD and DoIP, connects by Bluetooth or USB cable, and includes two years of free software updates. This kit adds three tools: the VSP600 inspection camera, the BST360 battery tester and the i-TPMS tire sensor tool.
Specifications
- Brand
- Launch
- Model number
- CRP919X
- Included Components
- CRP919X + VSP600 + BST360 + i-TPMS
What it does
Bidirectional diagnostics
Performs all-system bidirectional diagnostics across vehicle modules.
ECU coding
Performs ECU coding to reidentify adaptive data for components after repair or replacement.
Full-system diagnostics
Provides full-system diagnostics covering all available vehicle systems.
CAN FD and DoIP support
Supports CAN FD and DoIP vehicle communication protocols.
TPMS diagnostics
Includes built-in tire pressure monitoring system (TPMS) functionality.
Battery testing
Performs battery voltage testing.
OBD2 code reading
Reads and interprets OBD2 diagnostic trouble codes.
Also in The LAUNCH CRP919X and Its Kits
1
LAUNCH X431 CRP919X Scan Tool
The CRP919X on its own, over Bluetooth or a USB cable, with two years of free software updates.
2
LAUNCH X431 CRP919X Scan Tool + i-TPMS
Adds LAUNCH's i-TPMS handheld, which activates and programs tire pressure sensors, to the full CRP919X.
3
LAUNCH X431 CRP919X Scan Tool + CRP123X
Adds the CRP123X, LAUNCH's smaller reader for engine, transmission, ABS and airbag codes, as a second tool for the glovebox.
Where these picks come from: LAUNCH US
