
Heatshield Products Lava Hot Rod Sleeve, 1 in. ID × 10 ft.
Where we recommend it
No More Vapor Lock: Keeping Fuel Liquid in a Hot Vintage Engine Bay·#3
A 10 ft roll of 1 in. ID sleeve that stretches over fittings, for when the whole feed line needs protection rather than one hot spot.
Heatshield rates it to 1,100°F. The roll includes four heat-shrink ends to seal the cut edges.
$74.99In stock
About it
Heatshield Products 207010: Heat shield sleeve 1 id x 10 ft Roll- Lava Hot Rod Sleeve includes 4 heat shrink and keeps components protected from heat, rated for 1100F. - Prevent vapor lock and shift cables from melting with Lava hot rod sleeves from Heatshield Products. The heat shields for fuel lines combine the best of two worlds, the flexibility of a rugged hot rod sleeve with the strength of lava rock fiber. Lava fiber is naturally acid, chemical, brake fluid, and chemical-resistant. Additionally, the fiber is 25 percent stronger than fiberglass and is abrasion-resistant.The special braid of these tube heat shield sleeves allows them to have an expandable inside diameter up to 15 percent. To expand the inside diameter, shorten the length or bunch up the Lava hot rod sleeve to allow it to slide on over fittings and terminals. Once over, expand or stretch the length to tighten the sleeve onto the line or hose. To cut, use a sharp knife or pair of scissors. Each kit includes four heat shrinks to seal the ends of the oil line heat shield sleeve to the cable, tube, or hose it is protecting. Remember a loose-fitting heat shield sleeve is okay if the ends are sealed to prevent heat from getting trapped between the sleeve and the component it is protecting. The 10 ft. long sleeves are available in diameters ranging from 1/4 in. to 1.5 in. Additional details: . Heat shield loom and Hot Rod Sleeves shield harnesses and fuel lines even in harsh environments. They can reduce radiant heat damage and prevent vital fluids such as fuel from overheating.. Rated for 1,100 degrees F. Maximum ambient temperature: 2,000 degrees F. Lava fiber resists chemicals, oil, fuels, and even acid. Heat shield protection for: -- Fuel lines -- Brake lines -- Transmission lines -- Oil lines -- Turbo lines -- Harnesses
Specifications
- Brand
- Heatshield Products
- Model number
- 207010
- UPC
- 819825018288
Also in No More Vapor Lock: Keeping Fuel Liquid in a Hot Vintage Engine Bay

1
Canton Racing Phenolic Fuel Pump Insulator, Small-Block Chevy
A phenolic spacer that keeps a small-block Chevy's mechanical pump off the hot block. The first place heat gets into the fuel, and the cheapest one to fix.

2
DEI Vapor Block Fuel Line Sleeve, 3/8 in. × 24 in.
Wraps a 3/8 in. fuel line with an adhesive flap, so it goes on without disconnecting anything. Made for the stretch where the line passes the manifold or headers.

4
Edelbrock Heat Insulator Carburetor Gasket, 4-Barrel Square Bore
Swaps the carb base gasket for an insulating one that Edelbrock designed to stop fuel percolating in hot Performer-series carburetors.

5
AFR 1 in. Phenolic 4-Hole Carburetor Spacer, Square Bore
A 1 in. phenolic spacer puts real distance between a hot intake and the float bowls. The strongest fix here, and the only one that changes how the engine pulls.

6
Thermo-Tec Thermo-Shield Aluminized Heat Tape, 1.5 in. × 15 ft.
Self-adhesive aluminized tape for reflecting heat off hoses, wiring and the underside of the carb. The finishing touch, not the fix.
Where these picks come from: Summit Racing
