
DEI Vapor Block Fuel Line Sleeve, 3/8 in. × 24 in.
Where we recommend it
No More Vapor Lock: Keeping Fuel Liquid in a Hot Vintage Engine Bay·#2Best value
Wraps a 3/8 in. fuel line with an adhesive flap, so it goes on without disconnecting anything. Made for the stretch where the line passes the manifold or headers.
Each sleeve is 24 in. long; buy one per hot run rather than trying to stretch one.
$14.99In stock
About it
Design Engineering DEI 906645: Heat Sleeve, Vapor Block Fuel Line Sleeve, 1,200 degrees F, Silver, 0.375 in. Diameter, 24 in. Length, Each - DEI Vapor Block fuel line sleeves provide an easy, sensible, and low-cost solution to rough idling and difficult starting caused by vapor lock. Designed to greatly reduce heat in the line--keeping the fuel cooler and below boiling--the protective sleeves install hassle-free with a split design and adhesive flap; there's no need to disconnect the fuel line to install them! Simply wrap Vapor Block around the fuel line, remove the adhesive release liner, and press the adhesive-backed flap into place. Features and benefits include: . Made of glass fiber and polyester laminated to an aluminum outer layer. Offers excellent inexpensive, long-lasting thermal protection with no modifications needed . Available in different diameters
Specifications
- Brand
- Design Engineering DEI
- Model number
- 906645
- EAN
- 00607078066459
Also in No More Vapor Lock: Keeping Fuel Liquid in a Hot Vintage Engine Bay

1
Canton Racing Phenolic Fuel Pump Insulator, Small-Block Chevy
A phenolic spacer that keeps a small-block Chevy's mechanical pump off the hot block. The first place heat gets into the fuel, and the cheapest one to fix.

3
Heatshield Products Lava Hot Rod Sleeve, 1 in. ID × 10 ft.
A 10 ft roll of 1 in. ID sleeve that stretches over fittings, for when the whole feed line needs protection rather than one hot spot.

4
Edelbrock Heat Insulator Carburetor Gasket, 4-Barrel Square Bore
Swaps the carb base gasket for an insulating one that Edelbrock designed to stop fuel percolating in hot Performer-series carburetors.

5
AFR 1 in. Phenolic 4-Hole Carburetor Spacer, Square Bore
A 1 in. phenolic spacer puts real distance between a hot intake and the float bowls. The strongest fix here, and the only one that changes how the engine pulls.

6
Thermo-Tec Thermo-Shield Aluminized Heat Tape, 1.5 in. × 15 ft.
Self-adhesive aluminized tape for reflecting heat off hoses, wiring and the underside of the carb. The finishing touch, not the fix.
Where these picks come from: Summit Racing
